Question: Reversing the door swing of HD90-A2979, HD80-A3979, HD90-A3979, HD90-A3979S, HD90-A3S979

Reversing the door swing 

Before you start, unplug the dryer from its electrical outlet.

Handle parts carefully to avoid scratching paint.

Provide a non-scratching work surface for the doors.

Tools you will need: Phillips-head screwdriver.

Once you begin, do not move the cabinet until door-swing reversal is completed.

These instructions are for changing the hinges from the right side to the left side. If you ever want to switch them back to the right side, follow these same instructions and reverse all references to the left and right.

1. Remove the door assembly Open the door.

Remove the two screws holding the hinge/door assembly to the dryer. Carefully set the hinge/door assembly aside.

2.Remove, rotate and replace the inner door

Remove the eight stickers and screws securing the inner door to the outer door. Remove the inner door, rotate it 180° and reinstall it into the outer door using the same eight screws and stickers.

3.Remove, rotate and replace the door lock & strike plate.

Remove the two screws holding the strike plate, and then remove one screw of the door lock, push down and take out the lock rotated 180° and install it on the opposite side. the same eight screws and stickers.

4．Rotate and replace the hinge/door assembly